ANTCUBE Starter Kit L Gypsum

Starter Kit Gypsum Our Starter Kit with gypsum nest inset is designed for ant species that live in or between stones. In addition, gypsum nests are also suitable for species that live in earth nests. Starter Kit Gypsum Includes: 1x ANTCUBE – Arena 20x20x10 – flat 1x ant arena frame 20×20 1x ant arena cover 20×20 1x ANTCUBE – ant farm – L – 20×20 – standing 1x ANTCUBE – plaster nest 20×20 – standing 1x 0.5m hose, transparent 14/10 mm 1x ANTCUBE – red foil 20×20 – self-adhesive 1x substrate – sand-loam white – 1000g 1x grid insert – 50mm – stainless steel 1x Formicarium plug for 50mm hole 1x Formicarium plug for 27mm hole 1x mesh cap – 16mm – stainless steel 1x pool connector for hole 27 and hose 10-16 mm – M25 1x Formicarium nut M25 – gray 1x potion 2ml – 360 degrees 1x feed dispenser 2ml – can be dosed 1x mini thermo-hygrometer analog – display – hanging 1x Ant breakout protection oil 10ml 1x tweezers spring steel – wide – soft 1x tweezers plastic transparent 1x plastic pipette 3ml 1x hand magnifier – 2-fold – 30mm 1x Food Mix Set – standard sponge 1x foam wiper 150x18x2.5mm This plaster of paris starter set, with prefabricated corridors and chambers, is suitable for various species of ants, in particular also for species digging their nests. The “ANTCUBE – plaster nest” can be used as supplied,in the glass farm. Alternatively, however, the “substrate – sand-clay white” can be used to fill the farm or to close some of the chambers of the gypsum nest. If necessary, additional modules can be connected via the 50mm holes in the cover, e.g. the separately available foggers, fans or lighting. Alternatively, suitable mesh inserts and formicaria stoppers for closing are included in starter set. Depending on your preference, the formicarium can also be operated openly by simply putting on the removable frame and applying the ant outbreak protection oil to the edge. The “Drinker 2ml – 360 degrees” is intended for water, the “Feeder 2ml – can be dosed” for the carbohydrate and protein powder. The “mini thermo-hygrometer analog – display – hanging” can be attached to the frame or the cover and shows the climate values. Connecting the set to other products This set uses LARGE connectors (16mm) and can be connected using 16/10mm tubing to any other LARGE items in the ANTCUBE range. Notes on manufacturing The glass is cut to DIN 1249 with a tolerance of /- 1mm. In the case of extremely small species of ants, additional protection against outbreak is essential. Notes on the farm When attaching or removing hoses if the hose fits very tightly on the connection socket, the socket should be lightly rubbed with a drop of our breakout protection oil or powder. The hose should then be pushed onto the socket using a turning or screwing movements without loading the socket with up and down movements. The same applies when removing the hoses from the connection socket on the farm. Please don’t just pull it off! Instruction manual Instructions for use - Starter Set Plaster PDF Instruction Manual Download the PDF instruction manual for Starter Kit Gypsum online here, or view the pages above. DOWNLOAD PDF INSTRUCTIONS